© All rights reserved, Easy Group, LLC. Version 2.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
XEROX TEKTRONIX PHASER 6100 / SAMSUNG CLP 500
67
COLOR TONER INSTRUCTIONS
COLOR TONER INSTRUCTIONS
1. Remove the 4 screws from
the top of the cartridge.
2. Remove one screw from the
side of the cartridge
3. Carefully spread the sides of
the cartridge cover to release
the catches on both sides of
the bottom. A small flat-blad
ed screwdriver may be used,
but be careful not to break
the plastic.
4. The cover should lift straight up
and off. Be gentle and slow as
there may be a small amount of
glue on the front edge of the
plastic. You should now have
something resembling the
cartridge pictured above.
5. Remove the plastic plug in
the side of the cartridge with
a small pair of pliers. Pull on
alternate sides until the plugs
come out.
6. Carefully pour in the new toner.
Cleanup any spills or clothing
with cold water. Replace the
plug, cover and screws in reverse
order.
GENERAL COMMENTS:
(The Pictures show refilling a high capacity black cartridge. The standard capacity color cartridges are identical except the center
section of the cartridge is not raised.)