Page 66

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.

QMS 2200 / 2400 EPSON C1000 / C2000 / C3000

COLOR TONER INSTRUCTIONS

REFILL INSTRUCTIONS

GENERAL COMMENTS:

It is always better to underfill than to overfill a cartridge. You can always add more toner later.

Uni-Kit toner is researched and tested to produce excellent results - your first refill should be nearly 100% same quality as

the original cartridge. It is recommended that you refill the same cartridge no more than 2-3 times, because with each print cycle

the cartridge will wear and tear and quality will slowly diminish.

1. Using a screwdriver remove 1 screw

from the side of cartridge

2. This will expose the cap as shown.

The filling hole is behind this cap.

Remove this cap carefully. Then

remove the plastic cover.

3. Attach the pouring nozzle to the refill

bottle and pour the toner into the

cartridge

Note: For the QMS 2400 cartridge, there is a similar plug that as the QMS 2200 on the

opposite side of the cartridge that is semi-rigid but easily removable with a pair of pliers. You

do not need a screwdriver to expose that plug. Remove it with a pair of pliers and you have

exposed the filling hole.