Page 59

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.

DELL 5100cn

COLOR TONER INSTRUCTIONS

1. Locate the end piece as shown below left (usually BLACK, RED, YELLOW or

BLUE in color). You need to push in the two "prongs" (small grey prongs located

inside the black end-piece as shown to the left of the picture below), and

simultaneously pull the end piece away from the cartridge. This exposes the filling

hole.

2. Next pour the toner into the cartridge slowly and when the cartridge is full.

3. Now you need to replace the end-cap by pushing it back into place, making sure that

the end-cap and prongs are now situated the same was as they were before.

4. Gently shake the toner cartridge to ensure that the toner is distributed evenly inside

the cartridge.

5. Before installing the refilled cartridge, you need to change a setting on the printer so

that it will accept the refilled cartridge. You need to first press on the "MENU"

button on the LCD display of your printer.

6. Next, select "CONFIGURE"

7. Next, select "MAINTENANCE"

8. In the `Maintenance Menu', click YES when you scroll to the option `Non-Dell

Setting". It will then read Non-Dell Toner. Now the printer has been reset and will

accept the refilled cartridge. Simply turn the printer off, then back on and the reset

procedure is complete.

9. Insert the refilled cartridge