Page 58

All trademarks are property of their respective owners. Uni-Kit

has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.

All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.

DELL 3100 / Epson C1100 (CX11)

COLOR TONER INSTRUCTIONS

Note: Always refill in a well ventilated environment, preferably outside or at a workbench

1. Turn the handle of the cartridge to

the LOCKED position, which is the

bottom setting as shown in the

picture above.

2. Forcefully but carefully, move the

handle of the cartridge AWAY from

the cartridge as shown in this picture

above. Once the handle is removed,

you have exposed a white plastic

sealing cap.

3. Carefully Remove the white plastic

sealing cap with a screwdriver, do not

damage the plastic just maneuver it

away from the cartridge. Sometimes

there is another plastic cap hidden

underneath the first sealing cap, this

can also be removed with a screwdriver

(you can also push away at the 2nd

plastic plug through the small hole

which is on the back of the cartridge)

4. After the sealing caps have been removed, you have exposed the filling hole. Connect

the pouring spout to the toner refill bottle and pour it into the cartridge slowly. When full,

replace all plastic caps and the end piece of the cartridge just the way they were when you

started refilling. Turn the handle to the unlocked position, and follow your printer manual

instructions on how to install the cartridge into the printer.

TROUBLESHOOTING:

If the Dell 3100 printer does not recognize the refilled cartridge, follow these steps:

1) Restart the printer by turning it off for 2-3 minutes, then turning it back on

2) After the printer has restarted, take out the cartridge and shake it and reinstall it

3) If these steps dont work, try removing waste toner from the waste hopper. The reason for this is because if the machine sees too

much toner in the waste hopper, it may think the cartridge is empty.