© All rights reserved, Easy Group, LLC. Version 1.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
Xerox Cartridges
45
8R7971, 8R7972, 8R7973, 8R7974
1. The filling hole is located under the label on the top of the cartridge. Use the
empty needle to pierce through the label to make the filling hole.
2. Fill the syringe with ink and inject about 4 ml. of ink until the ink tank is full.
3. Use a piece of tape to seal the filling hole, make sure that the tape is stuck to the
cartridge
4. Rinse the syringe with water and dry for future use, or use with a different color
ink.
5. Reinsert the cartridge and run a priming cycle as per printer instructions.
Note: Immediately refill any empty cartridges.
Filling Hole
Under Label
Top and body
of cartridge