© All rights reserved, Easy Group, LLC. Version 1.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
Xerox Cartridges
42
8R7638
1. Using the included hole making tool make a filling hole in the front of the
cartridge about 1/2" from the top.
2. Connect the needle to the syringe and fill with ink.
3. Insert the filling needle into the hole and aim it towards the center of the
cartridge.
Note: The cartridge contains a dense sponge made out of felt. As soon as the
needle touches the felt stop pushing in the needle.
4. Inject up to 40 ml. of ink or until ink bubbles at the filling hole.
5. Use either the plug included in the kit or a piece of tape to seal the filling hole.
6. Rinse the syringe and needle with water and dry for future use.
7. Reinsert the cartridge and run a priming cycle as per printer instructions.
Note: Empty cartridges should be refilled immediately.
Make 1/8" /3mm
filling hole