© All rights reserved, Easy Group, LLC. Version 1.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
Epson Cartridges
21
A Chip Resetter (sold separately)
is needed for the following cartridges:
T0321,T0322, T0323, T0324, T0331, T0332, T0333, T0334, T0335,
T0336, T0341, T0342, T0343, T0344, T0345, T0346, T0347, T0348,
T0422, T0423, T0424, ICD Y21
1. Turn the cartridge upside down and using a paper clip or a similar object, pierce
through the label into the cartridge of the proper filling hole (as shown below).
2. Connect the needle to the syringe and fill with ink.
3. Inject about 5 - 7 ml. of ink into the filling hole until the cartridge is almost full.
Be aware that the needle will only go into the cartridge about 3/8 of an inch.
4. Use the tape dot to seal the filling hole, make sure it is completely sealed.
5. Rinse the syringe with water and dry for further use, or use with a different
color ink.
6. Follow the resetting instructions before inserting cartridge into printer.
Note: Immediately refill any empty cartridges.
Filling Hole
Do not use
this hole