© All rights reserved, Easy Group, LLC. Version 1.0
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identification purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.
Compaq Cartridges
Black Cartridges:
337714-001, 180845-001, 337709-001, 180847-001
1. Use the enclosed eyelet screw to enlarge the filling hole located at the top of the
cartridge. (Do not remove the cap.)
2. Connect the needle to the syringe and fill the syringe with 8 ml. of Cartridge & Print
Head Cleaner and inject into the cartridge. Reinsert cartridge into printer and print 5 test
pages.
3 Fill the syringe with ink. Insert the needle into the filling hole and push down into the
cartridge. Inject up to 20 ml. of ink or until the cartrid
ge is full.
Note: Immediately refill any empty cartridges.
Color Cartridges:
337715-001, 180846-001, 337710-001, 180848-001,180844-001,
Photo cartridges:
337711-001(photo)
1. The filling holes are located under the plastic cap. Use a thin flathead screwdriver or
knife to remove the cap. Important: Do not to damage the sensors on the back of the
cartridge.
2. Connect the needle to the syringe and fill with ink.
3. Insert the needle into the matching hole of the color to be refilled, (see diagram above)
and push into the cartridge. Note: You will feel a slight pressure because the cartridge
contains a sponge.
4. Inject about 8 ml. of ink, per color, into the cartridge until the ink begins to bubble at the
top of the sponge. Important: Do not overfill. Keep the sponge inside the cartridge white.
5. Rinse the needle and syringe with water and dry between each color refilling or store for
future use.
6. The cover can be reattached with a piece of tape.
16
Magenta
Yellow
Cyan
Fill Hole